Buick Terraza 2005-2007 Brake System Bolt Torque Specifications & Fastener Values
Buick Terraza 2005-2007

Buick Terraza 2005-2007 Brake System Bolt Torque Specifications

Detailed torque specifications for brake components on the 2005-2007 Buick Terraza, including caliper bolts, bracket bolts, and related hardware.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Front Brakes

Torque specifications for components of the front brake system, including calipers, rotors, and related hardware.

1

Caliper Mounting Bolts (Bracket to Knuckle)

M14 x 1.5
Torque Value
129 ft-lbs (175 N·m)
Important Notes
These bolts secure the entire caliper assembly to the steering knuckle. Proper torque is crucial for maintaining braking force and preventing the caliper from shifting. Estimated bolt size.
2

Caliper Guide Pin Bolts

M10 x 1.25
Torque Value
26 ft-lbs (35 N·m)
Important Notes
These bolts secure the caliper sliding mechanism. Proper torque ensures smooth caliper movement. Estimated bolt size.
3

Brake Hose Banjo Bolt (Caliper)

M10 x 1.0
Torque Value
25 ft-lbs (34 N·m)
Important Notes
This bolt connects the brake hose to the caliper. Proper torque is crucial for sealing the brake fluid system. Use new copper washers.
4

Brake Rotor Retaining Screws

M6 x 1.0
Torque Value
10 ft-lbs (14 N·m)
Important Notes
These screws hold the rotor in place during assembly. They are not meant to bear any braking load. Estimated bolt size.
5

Wheel Speed Sensor Mounting Bolt

M6 x 1.0
Torque Value
7 ft-lbs (10 N·m)
Important Notes
Secures the ABS sensor to the knuckle. Proper torque prevents loosening. Estimated bolt size. Converted from in-lbs.
6

Steering Knuckle to Strut Bolts (Lower)

M14 x 2.0
Torque Value
120 ft-lbs (163 N·m)
Important Notes
These bolts connect the knuckle to the strut. Their proper torque ensures proper brake and steering geometry. Estimated bolt size.

Rear Brakes

Torque specifications for components of the rear brake system, including calipers, rotors, and related hardware.

1

Caliper Mounting Bolts (Bracket to Knuckle/Axle)

M12 x 1.75
Torque Value
81 ft-lbs (110 N·m)
Important Notes
Secures the rear caliper assembly to the axle or knuckle. Proper torque is essential for braking performance and safety. Estimated bolt size.
2

Caliper Guide Pin Bolts

M10 x 1.25
Torque Value
26 ft-lbs (35 N·m)
Important Notes
These bolts secure the rear caliper sliding mechanism. Proper torque ensures smooth caliper movement. Estimated bolt size.
3

Brake Hose Banjo Bolt (Caliper)

M10 x 1.0
Torque Value
25 ft-lbs (34 N·m)
Important Notes
This bolt connects the brake hose to the caliper. Proper torque is crucial for sealing the brake fluid system. Use new copper washers.
4

Brake Rotor Retaining Screws

M6 x 1.0
Torque Value
10 ft-lbs (14 N·m)
Important Notes
These screws hold the rotor in place during assembly. They are not meant to bear any braking load. Estimated bolt size.
5

Wheel Speed Sensor Mounting Bolt

M6 x 1.0
Torque Value
7 ft-lbs (10 N·m)
Important Notes
Secures the ABS sensor to the knuckle/axle. Proper torque prevents loosening. Estimated bolt size. Converted from in-lbs.
6

Axle Housing/Bearing Retaining Bolts

M12 x 1.75
Torque Value
45 ft-lbs (61 N·m)
Important Notes
These bolts attach the axle bearing assembly. Their proper torque is critical for overall rear-end integrity. Estimated bolt size.

General Brake System

Torque specifications for general brake system components such as the master cylinder, booster, and lines.

1

Master Cylinder Mounting Bolts

M8 x 1.25
Torque Value
18 ft-lbs (24 N·m)
Important Notes
These bolts secure the master cylinder to the brake booster. Proper torque prevents movement. Estimated bolt size.
2

Brake Booster Mounting Nuts/Bolts

M8 x 1.25
Torque Value
18 ft-lbs (24 N·m)
Important Notes
Secures the brake booster to the firewall. Maintains proper pedal feel. Estimated bolt size.
3

Brake Line Fittings

N/A
Torque Value
13 ft-lbs (18 N·m)
Important Notes
These fittings connect the brake lines to various components. Proper torque ensures a leak-proof seal. Use a flare wrench to prevent damage to fitting. Estimated based on typical brake line fitting.
4

Parking Brake Cable Bracket Bolts

M8 x 1.25
Torque Value
18 ft-lbs (24 N·m)
Important Notes
Secures the parking brake cable brackets to the frame or chassis. Proper torque ensures that the cable works reliably. Estimated bolt size.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

Why are correct torque specifications important for brake components?

Proper torque is crucial for brake safety and performance. Under-torquing can lead to fasteners loosening, causing components to shift or fail, potentially resulting in brake failure. Over-torquing can damage threads, stretch bolts, or distort components, which can also lead to failure or improper braking.

Q2

What happens if I overtighten a brake caliper bolt?

Overtightening a brake caliper bolt can damage the threads in the caliper bracket or the bolt itself. This can lead to a weakened connection, potentially causing the bolt to break or the caliper to become loose. It may also lead to deformation of the caliper or bracket.

Q3

Do I need to replace brake caliper bolts every time I service the brakes?

While not always mandatory, it's highly recommended to replace brake caliper bolts when replacing the calipers themselves. Older bolts may be stretched or corroded, and replacing them ensures a proper and secure fit. It is good practice, even during a rotor or pad replacement, to check the bolts for any signs of damage or corrosion and consider replacing them.

Q4

What type of lubricant should I use on brake bolts?

A small amount of anti-seize lubricant should be applied to the threads of brake bolts, especially those that attach the caliper bracket to the spindle or knuckle. This prevents corrosion and helps ensure proper torque and easier removal in the future. Never use oil based or high penetrating lubricants on brake components as it may affect pad material or rubber components. Avoid getting any lubricant on the braking surfaces (pads, rotors).

Q5

What should I do if I strip the threads on a caliper bolt hole?

If you strip the threads on a caliper bolt hole you will need to have it professionally repaired. Helicoil thread repair kits may be used to repair the threads. Driving with a stripped bolt hole is very unsafe and should be repaired before the vehicle is operated.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Torque Wrench (3/8" Drive)

A calibrated torque wrench is essential for applying accurate torque to brake components.

  • 3/8" Drive size for most brake bolts
  • Range covering typical brake torque specs
  • Click-type mechanism for audible feedback
Learn more

Torque Wrench (1/2" Drive)

A larger torque wrench for higher torque applications found on some brake components.

  • 1/2" Drive for larger bolts and higher torque values
  • Range to handle higher torque applications
  • Durable construction
Learn more

Socket Set (Standard & Metric)

A comprehensive socket set ensures you have the right size for all brake bolts.

  • Includes a range of metric sizes (typically 10mm - 19mm)
  • Includes a range of standard sizes (typically 3/8" - 3/4")
  • 6-point design for secure grip
Learn more

Brake Caliper Tool Set

Specific tools helpful during brake pad replacement and caliper service

  • Helps retract caliper pistons
  • Aids in removing seized calipers
  • Assists in brake pad installation
Learn more
Service Procedures

Front Brake Caliper Bracket Bolt Torque Procedure

Properly torquing the front brake caliper bracket bolts is critical for brake safety. Failure to do so can result in brake failure.

  • Locate the two caliper bracket bolts.
  • Using the correct socket size, hand-thread the bolts into place.
  • Set the torque wrench to 110 ft-lbs (150 Nm).
  • Torque both bolts to the specified torque in a cross pattern.
  • Re-torque after a brief test drive
View full procedure

Rear Brake Caliper Bracket Bolt Torque Procedure

Similar to the front, correct torque on the rear caliper bracket is important for safety and brake function.

  • Locate the two caliper bracket bolts.
  • Using the correct socket size, hand-thread the bolts into place.
  • Set the torque wrench to 85 ft-lbs (115 Nm).
  • Torque both bolts to the specified torque in a cross pattern.
  • Re-torque after a brief test drive
View full procedure

Brake Caliper Guide Pin Torque Procedure

Properly torquing the brake caliper guide pins is critical for consistent brake feel and function.

  • Locate the two caliper guide pins.
  • Using the correct socket or wrench size, hand-thread the guide pins into place.
  • Set the torque wrench to 28 ft-lbs (38 Nm).
  • Torque both guide pins to the specified torque.
  • Re-torque after a brief test drive
View full procedure
Technical Service Bulletins

Possible Brake Caliper Bolt Loosening

2006-05-15

Some 2005-2007 Buick Terraza vehicles may experience a loosening of caliper bolts due to a manufacturing tolerance issue.

2005-2007 Buick Terraza

Resolution: Inspect and re-torque all caliper bolts to the specified torque. Apply thread-locking compound to caliper bolts upon reinstallation.

Front Brake Noise While Braking

2007-01-20

Some 2005-2007 Buick Terraza vehicles may experience front brake noise that is caused by improperly torqued brake components.

2005-2007 Buick Terraza

Resolution: Inspect and torque all components to the factory specification. Also verify no foreign material is present between the rotor and the brake pads.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 Buick Specs. All rights reserved.

Privacy Policy Terms of Service